The Tri-Sen TSx, is a SIL rated turbomachinery controller with 99.9999% reliability, a 5 millisecond scan rate, and configurable redundancy that’s perfectly suited for your critical turbomachinery control applications.
The TSx is uniquely suited to meet the needs of critical turbomachinery control applications in oil and gas, power, refining, chemicals, or any other industry where unmatched performance and flexibility is demanded. The TSx architecture is completely scalable from the simplest single chassis systems to the most complex systems with up to sixteen chassis per node without any degradation in performance. It’s a turbomachinery controller with 99.9999% reliability and an unheard of 5 millisecond scan rate (12 millisecond screw to screw) that’s perfectly suited for any critical turbomachinery control application.
- Overspeed Protection
- Gas Turbine or Steam Turbine
- Turbine Start-up & Sequencing
- Turbine Interlocks & Protection
- Turbine Speed Control
- Steam Extraction Control
- Gas Turbine Combustion Temperature Limiting
- Gas Turbine Steam Injection Control (augmentation or abatement)
- MW Load Control (Generator Application)
- AVR Control (Generator Application)
- Auto-synchronisation (Generator Application)
- Anti-surge Control (Compressor Application)
- Performance Control (Compressor Application)
- Load Share Control (Compressor and Generator Application)
- Temperature Quench Control (Refrigeration Compressor Application)
The TSx employs a card-in-chassis arrangement with external termination assemblies. This arrangement provides the most concise and secure packaging possible. Removal and replacement of the I/O and processor modules can be accomplished without the risk of disturbing the field wiring. Chassis power is provided separately from the field power to assure that field faults will not affect operation of the logic system.
In addition to being scalable, the TSx architecture is designed to support multiple architectures. That is, the TSx has the flexibility to be configured in a simplex configuration, a dual redundant configuration, TMR or a mix of any of these configurations. This feature allows the different controller configurations to be selected based on the integrity levels and availability needed for each application and thus enabling sharing a single set of spares for all configurations.
And, while the need is uncommon, the TSx architecture and packaging allows you to repair any redundant active component without interrupting the operation of the turbine/motor or process (driven equipment).
|Additional Hardware Features|
|Configurable Redundancy – Able to configure simplex or dual or TMR|
|Simplex configuration meets SIL-2 ratings or Dual meets SIL-3 ratings|
|High Speed Response Time (12msec)|
|1 msec SOE (Analog & Digital)|
|Online Program and Configuration Changes|
|Comprehensive diagnostics to ensure system integrity at all times|
|Chassis Mounted Servo Controller Module|
|Load sharing between redundant analog output legs|
|True voted redundancy – not just a simple fail-over scheme|
|High speed pulse input module – speed and acceleration updates every 1 ms|
|Reverse rotation detection|
|DI Module, 12-CH SIL-3, Supervised|
|DI Module, 32-CH SIL-2, Non-Isolated Single Ended|
|DO Module, 8-CH SIL-3, 20-140 VDC|
|DO Module, 8-CH SIL-3, 20-60 VDC Supervised|
|DO Module, 24-CH DC Voltage Sinking|
|DO Module, 24-CH DC Voltage Sourcing|
|DO Module, 16-CH SIL-3 Supervised|
|DO Module, 24-CH SIL-2 Supervised|
|RO Module, 12-CH SIL-3 24 Volt AC/DC|
|RO Module, 12-CH SIL-3 120 Volt AC|
|RO Module, 24-CH Maximum Load: 1A per channel|
|AI Module, 8-CH SIL-2, Isolated Low-Level (0 to ±160 mV)|
|AI Module, 8-CH SIL-2, Isolated Current Input|
|AI Module, 32-CH SIL-2, Non-Isolated Single Ended|
|THCO Module, 8-CH SIL-2, 0 to ±78.125mV|
|RTD Module, 8-CH 3/4-wire connected, 1KHz scan rate|
|AO Module, 4-CH SIL-3, Isolated Voltage Output|
|AO Module, 4-CH SIL-3, Isolated Current Output|
|AO Module, 16-CH SIL-2, Voltage Output|
|AO Module, 16-CH SIL-2, Current Output|
|Servo Module, 2-CH, ±160 mA AO, w/ 8-CH Isolated DI|
|PI Module, 8-CH SIL-2, 30KHz, w/ 8-CH DI, 8-CH Supervised DO|
The TSx comes with a fully integrated user-friendly suite of software applications specifically engineered to develop, deploy, commission and maintain your critical turbomachinery control application that includes:
NetArrays is an easy-to-use IEC61131-3 compliant project program development tool that incorporates a comprehensive set of graphical objects that can perform any control task
The TSx View application allows you to create and run your own custom Human-Machine Interface (HMI) to monitor and control your turbomachinery and auxilliaries. It’s OPC-enabled allowing for easy connectivity to other devices or systems via OPC-DA.
The Trend application graphically plots up to 10 traces of NetArrays data values. It has two distinct modes of operation: displaying real-time data (Live Data Mode) or displaing archival data from the alarm and data archive (Archive Data Mode).
Project Tag Database Manager
The Project Tag Database Manager provides a central database for device configuration data and tags for applications involving single or multiple nodes. Its secure, redundant architecture ensures seamless integration throughout the suite of applications and eliminates the tag management hassle associated with system integration.
Alarm and Data Archive
The Alarm and Data Archive provides redundant alarm management, data archival, 1 ms resolution sequence of events and OPC-DA functions.
|OPC-DA and A&E|
|Modbus TCP/IP Master and Slave|
|Modbus Serial Master and Slave|
|Operating Temperature||-20°C to +60°C (-4°to +140°F)|
|Storage Temperature||-25°C to +85°C (-13°to +185°F)|
|Humidity||10% to 95% non-condensing|